CAR(rate-limiting) is good i.e. if your HW/SW supports it AND no
performance/service impacts(most important).
Isnt there a way we can limit the # of TCP sessions for this P2P traffic
(pre-defined layer-4 ports)
SH
-----Original Message-----
From: Mark Pace Balzan [mailto:mpb@melitacable.com]
Sent: Saturday, May 04, 2002 11:56 AM
To: francisv@dagupan.com; cisco-nsp@puck.nether.net
Subject: Re: [nsp] Limiting bandwidth of P2P traffic
from my experience rate limting by acess-lists on specific tcp ports, or
nbar and policing which is abit buggy does the trick.
i'd be interested to know what others are doing
Mark
----- Original Message -----
From: <francisv@dagupan.com>
To: <cisco-nsp@puck.nether.net>
Sent: Saturday, May 04, 2002 4:17 PM
Subject: [nsp] Limiting bandwidth of P2P traffic
> Hi,
>
> Is there a way to limit the bandwidth of P2P (Kazaa, Morpheus, iMesh,
etc.)
> traffic? We have a 7206VXR on the border and 3640 facing the client side.
>
> ---
> francis a. vidal [bitstop network services] | http://www.bitstop.ph
> streaming media + web hosting | http://www.keystone.ph
> v(02)330-2871,(02)330-2872; f(02)330-2873 | http://www.kuro.ph
>
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:11:56 EDT