RE: PA-T3 vs. PA-T3+

From: Deepak Jain (deepak@ai.net)
Date: Sun Jun 02 2002 - 00:18:59 EDT


-----Original Message-----
[deleted]
On Sat, Jun 01, 2002 at 11:27:49AM -0700, Nathan Patrick wrote:
> Are there throughput/other differences between the PA-T3 and the PA-T3+?
The
> only difference I could find on the Cisco website is that the "enhanced"
version
> supports Kentrox DSUs. If I'm putting up a link between a pair of PA-T3s,
> Kentrox DSU support is inconsequential.
>
> I am looking to deploy a T3 between a 7206VXR and a 7507 VIP2. Using
PA-T3s,
> will I be able to achieve line rate?

        Yes.

---

The PA-T3 and PA-2T3 is end-of-sales on Sept 22, 2002. I can personally verify that the PA-2T3+'s work in exactly this configuration [line rate, 7507/VIP2].

We have seen that the PA-xT3 modules are more sensitive to LBO than their Larsecomm/Kentrox counterparts, YMMV -- but if you see random errors or line bounces check your LBO.

Deepak Jain AiNET



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:11:58 EDT