Re: [nsp] cisco voip/gatekeeper

From: Michal Mertl (mime@kpnqwest.cz)
Date: Tue Jun 25 2002 - 03:50:49 EDT


On Mon, 24 Jun 2002, Alex Rubenstein wrote:

>
> I am looking for some basic pointers on using a cisco gatekeeper (3600) in
> a simple, class-4 arbitrage environment.
>
> My questions centralize on the ability to have gateways register thier
> endpoints with the gatekeeper, and having the gatekeeper make a
> intelligent routing decision for the call based upon this endpoint
> registration, rather than a dial-plan.

If you need to have some wildcard numbers than the only solution I found
is below. If the numbers are just static you don't have to use
tech-prefix - gateway by default registers it's dial-peer number on the
gatekeeper.

>
> Anyone got some examples, clues, etc?

gateway:

----
int s0
 ip add 192.168.1.2 255.255.255.252
 h323-gateway voip interface
 h323-gateway voip id gk.dom.dom ipaddr 192.168.255.2
 h323-gateway voip h323-id a-city@dom.dom
 h323-gateway voip tech-prefix 813

dial-peer voice 1 pots destination-pattern 813... port 1/0

dial-peer voice 2 voip destination-pattern ...... session target ras gateway

---- gatekeeper: ---- int fa0 ip add 192.168.255.2 255.255.255.0

gatekeeper zone local gk.dom.dom dom.dom 192.168.255.2 no zone subnet gk.dom.dom default enable zone subnet gk.dom.dom 192.168.0.0/16 enable no shut ----- gatekeeper: show gatekeeper gw-type-prefix GATEWAY TYPE PREFIX TABLE ========================= Prefix: 813* Zone gk.dom.dom master gateway list: 192.168.1.2:1720 a-city

--- BTW 3600 is far too much powerwull for running small private gatekeeper. I'm running 2501 with ~100 gateways and 10 calls at a moment with 6-10% cpu load.

-- Michal Mertl



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:01 EDT