[nsp] Can OC12 card do OC-3 speeds?

From: Hagop Karaoghlanian (hkaraoghlanian@corp.attcanada.ca)
Date: Tue Jun 25 2002 - 14:31:30 EDT

Next message: Przemyslaw Karwasiecki: "[nsp] CBWFQ on 7200 with ST IOS trim"
Previous message: Hagop Karaoghlanian: "RE: [nsp] Experience with 12.1E in a SP environment"
Next in thread: Hagop Karaoghlanian: "[nsp] Can OC12 card do OC-3 speeds?"
Maybe reply: Hagop Karaoghlanian: "[nsp] Can OC12 card do OC-3 speeds?"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

my apologies. I did not change the subject.

-----Original Message-----
From: Hagop Karaoghlanian
Sent: Tuesday, June 25, 2002 2:21 PM
To: cisco-nsp@puck.nether.net
Subject: RE: [nsp] Experience with 12.1E in a SP environment

Hey guys,

Customers got a 6506 Switch with an OC-12 card. However the interface on
the distribution routers with in our internet are OC-3. Can we physically
have the OC-12 act as an OC-3?

if not, how would this be made possible?

by the way, the customer would like a 40 MEG ATM pipe to terminate on the
OC-12.

thanks all,
HK

Next message: Przemyslaw Karwasiecki: "[nsp] CBWFQ on 7200 with ST IOS trim"
Previous message: Hagop Karaoghlanian: "RE: [nsp] Experience with 12.1E in a SP environment"
Next in thread: Hagop Karaoghlanian: "[nsp] Can OC12 card do OC-3 speeds?"
Maybe reply: Hagop Karaoghlanian: "[nsp] Can OC12 card do OC-3 speeds?"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:01 EDT