[nsp] VPDN + IP Local Pool Issue

From: Tejal Shah (tejal.shah@surat.iqara.net)
Date: Thu Jun 27 2002 - 08:11:30 EDT


Dear All,

    I m using VPDN for allow user to dialin to my router
and user the service. My User will authenticate through
Radius.

  Following is the configuration .......
=================================================

vpdn enable
!
vpdn-group 1
 accept-dialin
  protocol pppoe
  virtual-template 1
 pppoe limit per-mac 10
!
!
!
!
!
interface Virtual-Template1
 mtu 1492
 ip unnumbered Cable3/0.2
 ip access-group telnetfilter in
 ip mask-reply
 ip accounting output-packets
 ip accounting access-violations
 no ip route-cache
 no snmp trap link-status
 peer default ip address pool pcs
 ppp authentication pap callin one-time
 ppp ipcp dns 10.10.10.10
 ppp timeout ncp 30
 ppp timeout authentication 20
!
!
!
!
!
!
ip local pool pcs 10.10.25.2 10.10.25.25

====================================================

   How can i increase the lease period of IP address which
my client will get from my NAS.so that my client will get
always the same IP address.

with regards

Tejal Shah

Go To http://www.iqara.net



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:01 EDT