Hello All
I have an access list:
ip access-list extended 127
permit icmp any any
permit tcp any any log
permit udp any any log
CISCO#show logging
Jul 3 15:33:17: %SEC-6-IPACCESSLOGP: list 127 permitted udp 192.168.255.6(0) -> 193.168.255.255(0), 3 packets
Jul 3 15:33:18: %SEC-6-IPACCESSLOGP: list 127 permitted tcp 192.168.2.30(0) -> 10.10.110.111(0), 1 packet
Jul 3 15:33:19: %SEC-6-IPACCESSLOGP: list 127 permitted tcp 172.16.133.74(0) -> 192.168.2.20(0), 1 packet
Why ports show 0 (zero)?I want to see port numbers.
My second question: is there any difference between the switching method of ethernet interface and serial interface?
Thank you in advance for any comments.
Birsen Ozturk
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:03 EDT