At 09:31 PM 09/30/1999 -0400, I Stong wrote:
>We have two T3 connections to two different ISP's using 7507 routers. We
>run BGP between each ISP and IBGP between our two 7507's.
>
>One T3 is a full T3 flat rate and the other is a falt fee at 15MB but
>burstable to 100MB (supposedly) with added cost over 15MB.
Wow, I'd love to get a 100mb/s T3!
>Anyway our traffic currently is split about 50/50 load wise between those
>two circuits - at roughly 20MB per circuit outbound.
>
>We want to influence traffic so it goes over the full T3 to more fully
>utilize that paid for bandwidth.
I would say that there isn't anything standard that you can do. You may
want to consider a route-map that ups the local-pref for certain AS_PATHs.
Maybe put all of your UUnet traffic on one, GTE on the other, etc.
-Steve
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:06 EDT