RE: [nsp] 10Mb eth question

From: Scott.Keoseyan@BroadWing.com
Date: Thu Jan 24 2002 - 17:29:34 EST


ip address xxx.xxx.xxx.xxx yyy.yyy.yyy.yyy secondary

-----Original Message-----
From: Birsen Ozturk [mailto:birsen.ozturk@is.net.tr]
Sent: Thursday, January 24, 2002 5:04 AM
To: cisco-nsp@puck.nether.net
Subject: [nsp] 10Mb eth question

Hello all
I have a Cisco2500 ethernet connected to a switch. The 2500 is supposed to
route back the traffic comming from Eth0 back to Eth0 if the destination of
the traffic is another router connected to another port of the same switch.
Will my 2500 do that(the Eth0 is 10Mb and half-duplex so I cannot make it
trunk). i.e. can I make something similar to "router-on-a-stick" topology
without VLANs on 10Mb half-duplex port?

Thanks in advanace
Birsen
+++The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon, this information by persons or
entities other than the intended recipient is prohibited. If you received
this in error, please contact the sender and destroy any copies of this
document.+++



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:29 EDT