Re: [nsp] Fwd: Why the 7206 cannot load my bgp as routing table ? Please Advice !!!

From: Harold Ritter (hritter@cisco.com)
Date: Thu Jan 24 2002 - 22:11:52 EST


Same difference, "no sync" is the answer.

Origin IGP, localpref 100, valid, internal, not synchronized <==========
This is why the route is not installed in the RT.

At 08:32 AM 1/25/2002 +0800, Raymond Leung wrote:
>actually i am using iBGP , how to make this into my routing table ??
>
>Please advice , thanks !!!
>>Date: Fri, 25 Jan 2002 08:02:35 +0800
>>To: cisco-nsp@puck.nether.net
>>From: Raymond Leung <rlcw@zonasa.com>
>>Subject: Why the 7206 cannot load my bgp as routing table ? Please Advice !!!
>>
>>tip>sh ip bgp 198.133.219.25
>>BGP routing table entry for 198.133.219.0/24, version 0
>>Paths: (1 available, no best path)
>> Not advertised to any peer
>> 10032 3549 7018 109, (received & used)
>> 10.10.24.1 from 203.129.80.36 (203.129.80.36)
>> Origin IGP, localpref 100, valid, internal, not synchronized
>>tip>sh ip route 198.133.219.25
>>% Network not in table
>>tip>
>>
>>how can i make this into routing table ???
>>
>>With Regards,
>>
>>
>>Raymond Leung
>>Network Analyst
>>Zonasa Network Limited
>>
>>
>>Suite 903,Technology Plaza
>>651 King's Road
>>Quarry Bay
>>Hong Kong
>>
>>AS4841 Object Maintainer
>
>With Regards,
>
>
>Raymond Leung
>Network Analyst
>Zonasa Network Limited
>
>
>Suite 903,Technology Plaza
>651 King's Road
>Quarry Bay
>Hong Kong
>
>AS4841 Object Maintainer
>

Harold Ritter, CCIE 4168
Advanced Network Services - ISP East
Cisco Systems
300 Apollo Drive
Chelmsford, MA 01824 USA
Phone: 978 497 3129
Fax: 978 497 3129
Cisco Systems- "Empowering the Internet Generation."



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:29 EDT