Hi all,
I am getting following error when i reboot my ubr7246VXR
CMTS with NPE-400.
========================================================
00:00:52: %SYS-3-LOGGER_FLUSHING: System pausing to ensure
console debugging output.
00:00:06: %UBR7200-3-CONFIG: Exceeds 600 bandwidth points
for slots 0, 1, 3 & 5
00:00:09: %LINK-3-UPDOWN: Interface FastEthernet0/0,
changed state to up
00:00:09: %LINK-3-UPDOWN: Interface GigabitEthernet1/0,
changed state to up
00:00:09: %LINK-3-UPDOWN: Interface Cable3/0, changed state
to up
00:00:09: %LINK-3-UPDOWN: Interface Cable4/0, changed state
to up
00:00:10: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet0/0, changed state to up
00:00:10: %LINEPROTO-5-UPDOWN: Line protocol on Interface
GigabitEthernet1/0, changed state to down
00:00:10: %LINEPROTO-5-UPDOWN: Line protocol on Interface
Cable3/0, changed state to up
00:00:10: %LINEPROTO-5-UPDOWN: Line protocol on Interface
Cable4/0, changed state to up
00:00:17: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet0/0, changed state to down
00:00:38: %LINEPROTO-5-UPDOWN: Line protocol on Interface
Cable3/0, changed state to down
00:00:38: %LINEPROTO-5-UPDOWN: Line protocol on Interface
Cable4/0, changed state to down
00:00:52: %UBR7200-0-TEMPHIGH: measured at 21C/69F is too
high: shutdown temperature 0C/32F
00:00:52: %ENVM-0-SHUT: Environmental Monitor initiated
shutdown
Buffered messageó
=========================================================
Pl. help me out to resolve this problem.
thanks in advance
Tejal Shah
Go To http://www.iqara.net
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:30 EDT