RE: [nsp] vrf on a native-mode Cat6k

• Next message: sthaug@nethelp.no: "RE: [nsp] vrf on a native-mode Cat6k"
• Previous message: Jayesh Karkhanis: "[nsp] IPSEC Tunnel"
• Maybe in reply to: Steve Birnbaum: "[nsp] vrf on a native-mode Cat6k"
• Next in thread: Rolands Truls: "RE: [nsp] vrf on a native-mode Cat6k"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

Hi Rubens!

 Are you sure, that it is work with OSM modules ?
How far i know, MPLS VPN does not suported for cat65xx yet, just label
switching/

regards

rolands

> -----Original Message-----
> From: Rubens Kuhl Jr. [mailto:rkuhljr@uol.com.br]
> Sent: Friday, February 15, 2002 7:38 PM
> To: 'Steve Birnbaum'
> Cc: cisco-nsp@puck.nether.net
> Subject: RE: [nsp] vrf on a native-mode Cat6k
>
>
>
>
> OSM Ethernet modules.
> http://www.cisco.com/univercd/cc/td/doc/pcat/4pgietop.htm
>
>
> Rubens
>
>
> -----Original Message-----
> From: Steve Birnbaum [mailto:sbirn@security.org.il]
> Sent: Friday, February 15, 2002 2:31 PM
> To: Kinczli Zoltin
> Cc: cisco-nsp@puck.nether.net; fizquierdo@datagrama.net
> Subject: Re: [nsp] vrf on a native-mode Cat6k
>
>
>
> > No, unfortunately it's not possible w/o additional hw.
>
> What hardware can be purchased that would allow this to
> function while
> still keeping the ethernet media on both sides as the ultimate
> connections to the up/downstream devices?
>
> Thanks...
>
> Steve
>

• Next message: sthaug@nethelp.no: "RE: [nsp] vrf on a native-mode Cat6k"
• Previous message: Jayesh Karkhanis: "[nsp] IPSEC Tunnel"
• Maybe in reply to: Steve Birnbaum: "[nsp] vrf on a native-mode Cat6k"
• Next in thread: Rolands Truls: "RE: [nsp] vrf on a native-mode Cat6k"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:33 EDT