Re: [nsp] 4700 ISDN BRI module config Q

From: john heasley (heas@shrubbery.net)
Date: Wed Nov 10 1999 - 16:04:54 EST


On Wed, Nov 10, 1999 at 02:55:39PM -0600, Scott Keoseyan wrote:
> John,
>
> Layer 1 Status:
> DEACTIVATED
>
> Layer 1 deactivated indicates that you have no BRI... or the interface is
> shut down, or the line is not plugged in. The spids will not be sent until
> the router sees layer 1 come up.

using pins 4 & 5 on the rj48, right?

> TEI Not Assigned, ces = 1, state = 1(terminal down)
> spid1 configured, no LDN, spid1 NOT sent, spid1 NOT valid
>
> The spids are marked invalid because they have not been verified by the
> switch, not because you mis-typed them.
>
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/dial_
> r/drprt1/drbri.htm#xtocid1645899
>
> is the URL with the descriptions on 'sh isdn status'.
>
> You most likely need to specify the LDN as well... probably just the
> seven-digit part of your SPID. You put this after your spid like so...
>
> isdn spid1 80055512121111 5551212
> isdn spid2 80055512131111 5551213
>
> but I guess that depends on your line setup.

according to what i was able to find on cisco's pages, the LDN is not
necessary. fwiw, i tried it w/ and w/o. it works both ways on my
3640.

thanks!

>
> Good Luck,
>
> Scott
>
> -----Original Message-----
> From: john heasley [mailto:heas@shrubbery.net]
> Sent: Wednesday, November 10, 1999 3:30 PM
> To: cisco-nsp@puck.nether.net
> Subject: [nsp] 4700 ISDN BRI module config Q
>
>
> having trouble with spid configuration (?) on a 4700 with an
> ISDN BRI 4-port module? running 120(5.6)S6 with a basic-ni
> switch and spids of the form <area code><number>1111, the
> router complains that the spids are invalid. according to
> the USW tech, these are the correct spids (and switch type)
> and an Adtran XRT accepts these and works properly.
>
> i can not find anything in the cisco docs that explains what
> layer 1 DEACTIVATED (or the other status msgs) means. anyone
> know off hand?
>
> tia.
>
> cisco-4700#sh isd sta
> Global ISDN Switchtype = basic-ni
> ISDN BRI0 interface
> dsl 0, interface ISDN Switchtype = basic-ni
> Layer 1 Status:
> DEACTIVATED
> Layer 2 Status:
> Layer 2 NOT Activated
> Spid Status:
> TEI Not Assigned, ces = 1, state = 1(terminal down)
> spid1 configured, no LDN, spid1 NOT sent, spid1 NOT valid
> TEI Not Assigned, ces = 2, state = 1(terminal down)
> spid2 configured, no LDN, spid2 NOT sent, spid2 NOT valid
> Layer 3 Status:
> 0 Active Layer 3 Call(s)
> Activated dsl 0 CCBs = 0
> The Free Channel Mask: 0x80000003
>
> interface BRI0
> ip address a.b.c.d 255.255.255.252
> no ip directed-broadcast
> encapsulation ppp
> isdn switch-type basic-ni
> isdn spid1 xxxxxxxxxx1111
> isdn spid2 xxxxxxxxxx1111
> isdn T203 10000
> no fair-queue
> ppp authentication pap callin
> ppp multilink



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:07 EDT