On Fri, Mar 08, 2002 at 07:09:31PM -0800, Carlos Patriawan wrote:
> as long as you have /32 there should be no problem, also be advised
> it's better if you've the same router-id for LDP & OSPF process.
>
this is true; however, Gopala is right in that OSR doesn't support
mpls-te. Yet.
eric
> Carlos
>
> -----Original Message-----
> From: Gopala Naganaboyina [mailto:gnaganab@yahoo.com]
> Sent: Friday, March 08, 2002 4:39 PM
> To: Wu Dong; mpls-ops@mplsrc.com
> Cc: cisco-nsp@puck.nether.net
> Subject: Re: Problem about mpls TE router-id
>
>
> Hi Wu, you can use router-id loopback 1. But I doubt
> if Osr7609 supports MPlsTE.
> rgds,
> gopal
>
>
> --- Wu Dong <wudong7212@sina.com> wrote:
> > Hi All,
> > I want to configure MPLS TE in Cisco OSR7609, Can I
> > use the interface loopback 1 as the mpls traffic-eng
> > router-id intead of loopback 0 ?
> >
> > Thanks
> > Wu Dong
> >
> > -------
> > The MPLS-OPS Mailing List
> > Subscribe/Unsubscribe:
> > http://www.mplsrc.com/mplsops.shtml
> > Archive:
> http://www.mplsrc.com/mpls-ops_archive.shtml
>
>
> __________________________________________________
> Do You Yahoo!?
> Try FREE Yahoo! Mail - the world's greatest free email!
> http://mail.yahoo.com/
>
> -------
> The MPLS-OPS Mailing List
> Subscribe/Unsubscribe: http://www.mplsrc.com/mplsops.shtml
> Archive: http://www.mplsrc.com/mpls-ops_archive.shtml
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:35 EDT