"Sorry -- The defect you have requested CSCdt4889 cannot be displayed.
This may be due to one or more of the following:
The defect number does not exist.
The defect does not have a customer-visible description available yet.
The defect has been marked Cisco Confidential."
cheers,
Alex
----- Original Message -----
From: "KF" <kf@reign.sk>
To: <cisco-nsp@puck.nether.net>
Sent: Monday, March 11, 2002 10:28 AM
Subject: RE: [nsp] Channelized E1 (balanced) PA 2 ports .....software
probz...
> everyone hitting this bug..
>
> CSCdt4889
>
> a.
>
>
> >
> >
> > Heyla,
> >
> > since last months.... I'm encountering an numerous problems
> > with Channelized traffic over Channelized E1 (balanced) PA's
> > (2ports) on
> > the 7206's.
> >
> > All subinterfaces running CEF/FLOW... but this problem
> > occuring also with route cache disabled:
> >
> > After the "long" time some of the subinterfaces starting to
> > have output drops ... a LOT OF.... I'm wiggin' outta.. , found that
> > physical layer have no errors... and the workaround is to
> > reload only ... no shut/no shut controller either sub intf.
> > help... Some
> > "circuits" gone berserk .. all this happening "often" let's
> > say once per week or two.. but..(t).....
> >
> > Was there any RMA concerning this PA's? or anyone
> > experienced simmilar probs?
> >
> > running from 12.0.18-19S1 on different boxes... all doin' the
> > same.. Should I wax a TELCO?
> >
> > greetz
> >
> > Alex
> >
> >
>
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:35 EDT