> I am having a little dificulty applying TACACS to some CISCO 800's I have
> out at some remote sites.
>
> I am using teh same defined TACACS configs for all of our other CISCO gear
> (2500's, 2600's, 3600's, 4x00's, 7x000, 6500's etc...) and it's not
> accepting it...
>
> Does anyone know the trick to this on this (800) platform?
You need the IP Plus IOS Feature set for 800 series routers if you use
TACACS. In IP Only IOS the CLI accepts commands to configure TACACS, but
they doesn't work.
Hope this helps
---------------
Andrey Kostin
East Connection ISP, Moscow, Russia. http://www.east.ru
.
>
> Please contact me off list...
>
> --
> Rich Sena - ras@thick.net
> ThickNET Consulting
> "On the way to understanding; you understand, and forget."
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:35 EDT