Re: [nsp] Good IOS for 2620 with NM-4T1-IMA PPPoE / ATM

From: Andrey Kostin (ankost@east.ru)
Date: Mon Apr 08 2002 - 05:11:30 EDT


> Yes...that is it. FN claims to cover 12.2T, so I went and looked again
> just now, figuring that maybe this was a brand new release. According to
> the docs, pppoe was introduced in 12.2(2)T, which seems to have been
> released in June 2001. So why does FN still say PPPoE isn't supported on
> the 2600 platform?

>From reality, I use PPPoE(aggregation, non-atm) on 2600 since 12.1(5)T. Also
I've tried 1600 (successfully!) and now I have small PPPoE aggregation on
1720.
Also, I've tried in the lab MPLS PE on 2600 with 12.2T telco feature set,
seems it works.
---------------
Andrey Kostin
East Connection ISP, Moscow, Russia. http://www.east.ru

>
> Also, while I was looking, I took a look at Enterprise Plus for the
> 2610-2613 series. Minimum requirements are 32mb flash, 96mb RAM.
> According to
>
http://cio.cisco.com/univercd/cc/td/doc/product/access/acs_mod/cis2600/hw_in
st/hw_notes/2600mem.htm
> the 2610 maxes out at 16mb flash, 64mb RAM. What sort of cruel trick is
> this?
>
> And finally, I just did another search for MPLS VPN and 2600, and it seems
> there is now some basic support for MPLS on the 2600 series, but not
> enough to actually use a 2600 as a PE...unless I just haven't found the
> right docs and releases.
>



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:40 EDT