> our big iron catalysts (550x) have the nice and helpful command
> "set port broadcast m/n 5%" to limit broadcast traffic originating from
> that port to 5% of the available (port) bandwidth.
>
> Which is a very good thing :-) - in our sceneario, there is hardly any
> broadcast traffic except ARP, and everything exceeding a mbit is an
> error, and the port shall be throttled.
>
> Now I've been looking for a similar feature on the 3500XL, but can't find
> anything - does it mean it's not there, or I just looked in the wrong
> place?
port storm-control
Use the port storm-control interface configuration command to enable
broadcast, multicast, or unicast storm control on a port. Use the no
form of this command to disable storm control or one of the storm-control
parameters on the port.
Steinar Haug, Nethelp consulting, sthaug@nethelp.no
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:45 EDT