Somone posted a few ram manufacturers with searches, this is the only
one i remember. lost my mail archives
http://www.ec.kingston.com/ecom/kepler/mfrmod_Bod.asp
-d
Thus spake Jared Mauch (jared@puck.nether.net):
> I would get the ECC
>
> Just as a guess.
>
> - jared
>
> On Thu, Dec 16, 1999 at 07:44:47PM +0300, Dimitri Sidelnikov wrote:
> > Hi!
> >
> > Could anybody tell me, which kind of DIMMs are used in NPE-300?
> >
> > E.g. I want to buy 128M DIMM from the third party (not from Cisco). Which
> > parameters of the DIMM are absolutely inevitable and which ones are recommended
> > for relyable work in NPE-300?
> >
> > Now I have the following choice:
> > - 128 Mb PC100 DIMM 168-pin SDRAM Modules / 16MBx64-08ns
> > - 128 Mb PC100 ECC DIMM 168-pin SDRAM Modules / 16MBx72-08ns
> > there are also 10ns and 6ns modules of both types.
> >
> > Which one would you recommend to buy?
> >
> > Thank you.
> > ---
> > D. Sidelnikov
>
> --
> Jared Mauch | pgp key available via finger from jared@puck.nether.net
> clue++; | http://puck.nether.net/~jared/ My statements are only mine.
> END OF LINE |
--
+---------==============================================---------+
/ Derrick Daugherty 512.434.5999 /
/ Harte Hanks UNIX Services derrick@riddlebox.harte-hanks.com /
/ Infrastructure 011001100110111001101111011100100110010000 /
+---------==============================================---------+
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:08 EDT