Re: [nsp] OSPF stub areas

From: Basil Dolmatov (dol@info.east.ru)
Date: Tue Feb 01 2000 - 03:56:49 EST


On Mon, 31 Jan 2000, Vinny India wrote:

> I have several routers on my network with 8 megs of memory or less, they
> only have one link to the backbone. So there is no need to have them get a
> full ospf routing table. So I decided to configure a stub area, and found
> that I was unable to redistribute connected and statics from a stub router.
> Is there a work around? any suggestions? Or do I have to just run seperate
Look at NSSA feature. It was created exactly for your case.. ;)

> area under seperate procees in order to do the filtering I'm looking for.
NOOO! ;)
> Any sample configs from someone doing this would be great.
>
Search on www.cisco.com with "NSSA" as keyword will reveal a lot ;)

---------------------------------------------------------
Basil (Vasily) Dolmatov CCIE #5347, CCNP-Security, CCDA
East Connection ISP, Moscow, Russia. (http://www.east.ru)



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:09 EDT