By 6509 L3 switch do you mean a 6500 with PFC (L3 gear but no router) or
6500 with PFC and MSFC (IOS router) ?
6500/PFC can do VACL (VLAN ACLs) for intra-vlan traffic (can reference IPs
on other subnets that will be reached by a router, though) and 6500/PFC/MSFC
can do VACL and IOS ACLs.
ACLs, both types, are enforced by the supervisor engine, so it doesn't
matter wheter port type the packet comes from: 10, 100 or 1000 Mbps port.
Rubens Kuhl Jr.
-----Original Message-----
From: RSMANI [mailto:rsm@ren.nic.in]
Sent: quinta-feira, 21 de setembro de 2000 11:55
To: cisco-FAQ
Subject: [nsp] Regarding 6509 L3 Switch..
Hi!
I am planning to go in for a cisco 6509 L3 Switch..
Has any used access-list /extented IP access-list on the 10/100MBPS
ports..? This is not available in the lower model 2948GL3..
I you can send some sample conf on 10/100 MBPS ...?
How good and powerful are the access-list..?
Also Does it support WCCP-.?
Iyer
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:17 EDT