Cisco don't do a single-mode FE port fibre port.
> If you can't get singlemode interfaces, use multimode interfaces, and use
> a convertor box between multimode and singlemode fibre. I've just bought a
> bunch of these from Blackbox.
I used to do this until I reviewed a list of outages that we had
over a 24 month period and found that in 70% of them, the convertor
box was the cause of the outage :(
Regards,
Neil.
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:17 EDT