[nsp] 6400 fastethernet port

From: Cho Man Fai (mfcho@hknet.com)
Date: Thu Oct 05 2000 - 03:42:26 EDT

Next message: Vinod Anthony Joseph Cherunni: "[nsp] REG: MPLS VPN route exchange"
Previous message: Vinod Anthony Joseph Cherunni: "RE: [nsp] REG: MPLS based VPN's"
Next in thread: Robert Staats: "RE: [nsp] 6400 fastethernet port"
Maybe reply: Robert Staats: "RE: [nsp] 6400 fastethernet port"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Dear all,

A 6400 fast ethernet port cannot be connected as 100M to a catalyst 10/100
port. Even worse is that if we set the catalyst port to 100M/full duplex,
the connection is lost. We are currently configuring the port as 10M/full
duplex in catalyst.

interface FastEthernet0/0/0
bandwidth 100000
ip address 202.67.143.61 255.255.255.0
full-duplex
!

Do you have any idea to set the fast ethernet port to 100M in 6400?

Thanks in advance.

Rgds,
Kenneth Cho

Next message: Vinod Anthony Joseph Cherunni: "[nsp] REG: MPLS VPN route exchange"
Previous message: Vinod Anthony Joseph Cherunni: "RE: [nsp] REG: MPLS based VPN's"
Next in thread: Robert Staats: "RE: [nsp] 6400 fastethernet port"
Maybe reply: Robert Staats: "RE: [nsp] 6400 fastethernet port"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:18 EDT