[nsp] [NSP] T3 port adapter and back-to-back testing

From: Richie (rb@mindspring.com)
Date: Tue Nov 21 2000 - 10:19:15 EST


Can someone assist me with this? I have two 7505 routers with RSP4, VIP2-50
and PA-2T3 port adapters. I am performing testing and need to connect the
T3's back-to-back. I am having trouble with the config and/or possibly the
adapters. I have been informed that I don't need to configure clock on one
side as usually is done. I understand the concept of DCE to DTE cables as I
have done this with serial connections and no problems.

I am using 75ohm, 16AWG cables with the transmit going to the receive on the
other router and vice versa.

The questions:
1. Do I need special cables?

2. Do I need to set clock on one side?

3. Do I need to set clock source internal or line?

If you have a sample config to use that would be great or want to contact me
directly please do so.

Thanks in advance,
Richie Bowick
rb@mindspring.com



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:21 EDT