We are changing our method of customer access from ATM/FR to clear-channel,
via multi-channel E3 and t3 circuits. Because of our current customer base
being connected via FR we would like to keep our CPE config standard. We
will be keeping the FR config on new CPE's but our FR network uses LMI.
Are there any adverse effects when enabling Frame-Relay Switching on the
Access Route so simulate LMI? These 7206 VXR/300 routers will have up to 64
2 Meg connections or 32 2Megs plus 4 45Meg connections?
Thanks in advance
Jonathan
**********************************************************************
COLT Telecommunications
Registered in England No. 2452736
Registered Office: Bishopsgate Court, 4 Norton Folgate, London E1 6DQ
Tel. 020 7390 3900
This message is subject to and does not create or vary any contractual
relationship between COLT Telecommunications, its subsidiaries or
affiliates ("COLT") and you. Internet communications are not secure
and therefore COLT does not accept legal responsibility for the
contents of this message. Any view or opinions expressed are those of
the author. The message is intended for the addressee only and its
contents and any attached files are strictly confidential. If you have
received it in error, please telephone the number above. Thank you.
**********************************************************************
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:25 EDT