Re: [nsp] Bridge mib per-vlan

From: Subhendu Ghosh (sghosh@stevens-tech.edu)
Date: Mon Jan 22 2001 - 12:18:57 EST

Next message: lists: "[nsp] RPF question..."
Previous message: Subhendu Ghosh: "[nsp] Bridge mib per-vlan"
In reply to: Subhendu Ghosh: "[nsp] Bridge mib per-vlan"
Next in thread: Chuck Church: "RE: [nsp] 3620 hardware/software problem"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Answered..
set community = community@vlan brings up the per-instance MIB..

-sg
On Mon, 22 Jan 2001, Subhendu Ghosh wrote:

> Any one with pointer on how to access the per-vlan bridge-mib?
>
> Use 802.1q trunking between 5500 and 3500s.
>
> All switches are in the default vlan1 for management.
>
> snmpwalk for dot1dFdpTable returns only vlan 1 mac addresses
>
> -regards
> Subhendu Ghosh
>
>
>
>

Next message: lists: "[nsp] RPF question..."
Previous message: Subhendu Ghosh: "[nsp] Bridge mib per-vlan"
In reply to: Subhendu Ghosh: "[nsp] Bridge mib per-vlan"
Next in thread: Chuck Church: "RE: [nsp] 3620 hardware/software problem"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:25 EDT