We have DSL deployed to a site and we want to do bandwidth limits using
ATM.
We have a 6160 connected to a 7200VXR.
We built atm connection table rows on the 6160 to apply to the PVC's on
each DSL interface. But it doesn't seem to do anything.
Here are some config snippits:
----6160----
atm connection-traffic-table-row index 256 ubr pcr 256 mcr 0
interface ATM1/1
description LAB TEST MODEM
no ip address
no atm ilmi-keepalive
atm pvc 0 35 rx-cttr 256 tx-cttr 256 interface ATM0/1 2 257
----END 6160----
----7200----
interface ATM4/ima3.2257 point-to-point
description TEST CONNECTION - ATM1/1 ON SUBTENDED CHASSIS
ip unnumbered Loopback23
ip helper-address 204.118.20.1
atm route-bridged ip
pvc 2/257
encapsulation aal5snap
----END 7200----
Do we need to do anything on the 7200 to facilitage a forced rate of
256Kb for this DSL PVC?
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:27 EDT