Have you used the IOS Feature Navigator? You can search by release or
desired feature to find the supported IOS.
http://www.cisco.com/go/fn/
-----Original Message-----
From: Vinod Anthony Joseph Cherunni [mailto:vac@dsqworld.com]
Sent: Saturday, February 10, 2001 7:18 AM
To: cisco-nsp@puck.nether.net
Subject: [nsp] REG: Cisco IOS Software
Hi All,
Is there any method that Cisco provides to choose an appropriate IOS based
on the role the router plays. For example I have been trying to use a 2610
router for a customer multihoming to an upstream ISP. The customer is
running BGP with his provider, uses NAT, & CAR. And I started by using an
IOS that was quiet buggy. Now I have put him the 12.0.7 (T), & am observing
it. In an couple of months we would be replacing the customer router with a
7206 - VXR, & this is a stopgap arrangement. I am again worried on what IOS
I would need to choose fot the Cisco 7206-VXR.
Kindly advice me.
With warm regards,
Vinod.
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:28 EDT