Oops... HSRP probably won't be the answer (the fact that the two
interfaces were on the same router eluded me somehow)...
Take a look at FastEtherChannel... Might be a solution...
On Wed, 7 Mar 2001, William R. Charnock wrote:
> You need to look at HSRP. That should take care of your problem.
>
> On Wed, 7 Mar 2001, Vinod Anthony Joseph Cherunni wrote:
>
> > Dear All,
> >
> > In a Cisco 7206-VXR with two Ethernet ports (One avaialable on the
> > NPE-300, & another as a module), Is it not possible to build system level
> > redundancy by physically connecting both the ports on a single switch. I
> > am unable to define both ports to be part of the same IP subnet. Is there
> > any workaround for this.
> >
> > Kindly enlighten me
> >
> > With warm regards,
> > Vinod.
>
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:31 EDT