On Thu, Mar 15, 2001 at 01:09:34PM -0800, Danny Sutantyo wrote:
> I heard the new IOS for GSR has a capability processing ACL on the line
> card, has anyone tested this feature before?
Yes.. acl on linecards work. in some previous versions
I understand that it crashed them but I've got E0,E1 and E2 linecards
that get acls put on them periodically (DoS tracking) that work
ok w/ 12.0(13.6)S2 and later.
- Jared
> On Thu, 15 Mar 2001, Shankar Vemulapalli wrote:
>
> > Ed -
> >
> >
> > Policy-Routing feature on GSR is supported only on Engine 0 and Engine 1
> > Cards at this time -
> >
> > This feature is available on these cards only from 12.0(12.6)ST &
> > 12.0(13)S - & above.
> >
> >
> > /Shankar
> >
> > ! From cisco-nsp-request@puck.nether.net Thu Mar 15 12:52:39 2001
> > !
> > ! Anyone know about any issues with GSRs and policy routing?
> > ! I've got a situation where a GSR will be doing policy routing on
> > ! some gigabit ethernet interfaces and I don't want to step into a
> > ! pile of dog-doo...
> > !
> > ! Thanks,
> > !
> > ! Ed
> > !
> >
-- Jared Mauch | pgp key available via finger from jared@puck.nether.net clue++; | http://puck.nether.net/~jared/ My statements are only mine.
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:32 EDT