Re: [nsp] Cisco Setup 2621

From: Danny Sutantyo (dsutanty@dsutanty-wkst.sc.intel.com)
Date: Wed Mar 28 2001 - 17:50:54 EST


So what's the config on Fa0/0?
DS
On Wed, 28 Mar 2001, RTS wrote:

> I am trying to set up a FastEthernet0/1 port on a 2621 router.
>
> I am trying to either set the ip address or use unnumbered.
>
> I have ip on F0/0 as xxx.xxx.xxx.129 255.255.255.192
>
> When I set the F0/1 as xxx.xxx.xxx 130 255.255.255.192 I get the following:
> xxx.xxx.xxx.128 overlaps with FastEthernet0/0
>
> When I set the F0/1 as ip unnumbered F0/0 I get the following:
> Point-to-point (non-multi-access) interfaces only
>
> What is the problem I am not seeing.
>
> Thanks
> Randy
>



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:33 EDT