Re: [nsp] distributed round-robin on 12008

From: Eric Osborne (eosborne@cisco.com)
Date: Fri Apr 06 2001 - 23:38:48 EDT


On Fri, Apr 06, 2001 at 04:39:21PM -0400, Rajesh Talpade wrote:
> Hi
>
> I emailed a query regarding DRR on Cisco 12008 a few days back, but did
> not receive a response yet. Does this mean that the 12008 does not
> support DRR, or any other WFQ-equivalent, currently ?

no; the entire 12000 line supports mdrr.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120st/120st10/10st_cos.htm

is the first thing I could find. Yes, it's an MPLS doc, but the MDRR
config is the same for both mpls and IP.

eric

>
> Anyone from Cisco care to respond ?
>
> Thanks.
> Rajesh.
>
>
> > Would someone point me to documentation describing configuration of
> > distributed round-robin or equivalent on a 12008. It currently has IOS
> > version 12.0(12)S, but this can change if needed.
> >
> > I have looked thru the Cisco web-site, and was not successful in finding
> > relevant information.
> > They talk about WRED in the same breath as DRR, but do not explicit
> > indicate how DRR can be configured/used.
> >
>
> --
> Rajesh R. Talpade rrt@research.telcordia.com 973 829-4261
> Director, Network Security Group, Telcordia Technologies



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:34 EDT