On Mon, Apr 30, 2001 at 04:48:09PM +0200, Brian Murphy wrote:
> Dine,
> Can you please supply a copy of the configuration, minus passwords
> etc......
You seem to be missing the fact that when "sh run" is issued
nothing is displayed.
I would recommend doing this:
clear ip route *
That should sufficently defragment the memory that
you can issue "sh run" and "wr" or whatever commands you use
to save your config.
- jared
> -----Original Message-----
> From: Dragan Dincic - Dine [mailto:dine@swiftkenya.com]
> Sent: Monday, April 30, 2001 3:58 PM
> To: BrianM@dial.pipex.com; 'Cisco-Nsp'
> Subject: RE: No running configuration
>
> I have seen now that I'm missing that info...
>
> cisco 3640 (R4700) processor (revision 0x00) with 27648K/5120K bytes of
> memory.
> 8192K bytes of processor board System flash (Read/Write)
>
> Which is exactly what CISCO is recommending...
>
>
> dine
>
>
>
>
> -----Original Message-----
> From: Brian Murphy [mailto:BrianM@dial.pipex.com]
> Sent: Monday, April 30, 2001 16:54
> To: dine@swiftkenya.com; 'Cisco-Nsp'
> Subject: RE: No running configuration
>
>
> Dragan Dincic - Dine,
> There is some critical information missing from the show version you
> included in your previous email, but according to cisco the memory
> requirements for your IOS and platform are as follows:
>
>
> Minimum Recommended Memory to download image - 8 MB Flash and 32 MB RAM
>
>
> -----Original Message-----
> From: Dragan Dincic - Dine [mailto:dine@swiftkenya.com]
> Sent: Monday, April 30, 2001 3:42 PM
> To: Cisco-Nsp
> Subject: No running configuration
>
> Has anybody experienced this:
> When you do the "sh running-config " - there is no running
> configuration.
> If you issue "sh startup-config " - configuration is there.
>
> just terminal monitor reveals following:
> 02:45:27: %SYS-2-MALLOCFAIL: Memory allocation of 129016 bytes failed
> from
> 0x60239AD8, pool Processor, alignment 0
>
> -Process= "Virtual Exec", ipl= 0, pid= 54
> -Traceback= 602AC974 602AE3F8 60239AE0 6025AA50 60251EE4 6025D45C
> 602A3F2C
> 602A3F18h flas
>
> PID
> [54 130 54836 52420 15272 0 0 Virtual
> Exec]
>
> If I try to copy startup into the running configuration I get following
> error:
>
> %Error opening system:/running-config (Not enough space)
>
>
> Below is the version of the IOS that I'm running and memory
> configuration.
>
> #sh ver
> Cisco Internetwork Operating System Software
> IOS (tm) 3600 Software (C3640-IS-M), Version 12.0(4)T, RELEASE SOFTWARE
> (fc1)
> System image file is "flash:c3640-is-mz.120-4.T.bin"
>
> 2 Ethernet/IEEE 802.3 interface(s)
> 46 Serial network interface(s)
> 2 Channelized E1/PRI port(s)
> DRAM configuration is 64 bits wide with parity disabled.
> 125K bytes of non-volatile configuration memory.
> 8192K bytes of processor board System flash (Read/Write)
>
> Configuration register is 0x2102
>
>
>
>
>
>
> Dragan Dincic - Dine
> Technical Manager
> Swift Global (K) Ltd.
> dine@swiftkenya.com
> ==============
> P.O. BOX 42164
> Nairobi, KENYA
> ~~~~~~~~~~~~~~
> Tel : +254 2 545 533
> Fax : +254 2 545 534
> ~~~~~~~~~~~~~~
>
-- Jared Mauch | pgp key available via finger from jared@puck.nether.net clue++; | http://puck.nether.net/~jared/ My statements are only mine.
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:36 EDT