> Are you have the URL to download these IOS e.g
> 12.1(0.4) 12.1(0.5)T 12.1(1)DC 12.1(1)DB
> thank you.
> --nazri
You don't want to use those IOS versions; you want to use
more recent ones.
You can download IOS from CCO:
http://www.cisco.com/cgi-bin/Software/Iosplanner/Planner-tool/iosplanner.cgi
Aaron
---> On Fri, 18 May 2001, Denis Saveliev wrote:
> > > > This is a well known bug - CSCdp33819 > > We were hit by it quite hard but luckily cisco was quick to fix it. So, the > > standard sdvice - upgrade the ios! :-) > > > > Bug Id : CSCdp33819 > > Headline on TTY lines process virtual-exec is running, no user dialed in > > Version Found 12.0(5)T01 > > Fixed-in Version 12.1(0.4) 12.1(0.5)T 12.1(1)DC 12.1(1)DB > > > > Release Notes > > If you enter the show users command, you might see that > > the Virtual Exec process is running on the modem even when no users are > > connected. This situation does not affect the allocation of the modem for > > subsequent sessions. The next user that logs in to the modem will clear the > > condition. There is no workaround. > > > > Hope this helps. > > > > Denis Saveliev > > Network Engineer > > Energis Squared > > DDI: +44 (0) 113 207 6188 > > Fax: +44 (0) 113 234 6065 > > Mob: +44 (0) 7899 995 996 > > > > > > > -----Original Message----- > > > From: Mohd Nazri Ismail [mailto:mnazri@mimos.my] > > > Sent: 18 May 2001 01:54 > > > To: cisco-nsp@puck.nether.net > > > Cc: tam; Alessandro Chiolo; Nikki Mehta; Cisco-Nas (E-mail); Cisco-Nsp > > > (E-mail) > > > Subject: [nsp] AS5300 <Hangging/Stuck> > > > > > > > > > > > > > > > Hello Everybody, I need some help here. > > > > > > We are using Cisco AS5300, > > > I normally have the post dial terminal screen up (bring up > > > terminal after > > > dialing) to check the login process and found that some > > > modems just hang > > > after presenting you with the login screen. It cannot accept > > > input from my > > > keyboard as it does not echo the characters that I type. Then > > > it returns a > > > timeout message! It looks like when there are many users online. > > > > > > When we run command 'show users', it will show a lot of ' > > > Virtual Exec', > > > default only 5 'Virtual Exec' BUT in my case it will appear more that > > > that. > > > > > > After i reboot/reload my AS5300, it will back to normal and > > > our users can > > > dial in without any problem to AS5300. This problem will > > > happen again in > > > the future. > > > > > > > > > Anyone from this group have faced this problem. Please help me. > > > > > > thank you a lot. > > > > > > --nazri/access > > >
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:38 EDT