RE: [nsp] Changing Ctrl-Shift-6 X

From: Brian Dennis (brian@5g.net)
Date: Thu May 24 2001 - 12:08:41 EDT


Yes, see below.

Access-Server-A#term escape-character ?
  BREAK Cause escape on BREAK
  CHAR or <0-255> Escape character or its ASCII decimal equivalent
  DEFAULT Use default escape character
  NONE Disable escape entirely

Access-Server-A#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Access-Server-A(config)#line vty 0 4
Access-Server-A(config-line)#escape-character ?
  BREAK Cause escape on BREAK
  CHAR or <0-255> Escape character or its ASCII decimal equivalent
  DEFAULT Use default escape character
  NONE Disable escape entirely

Access-Server-A(config-line)#

Brian Dennis, CCIE #2210 (R&S)(ISP/Dial) CCSI #98640
5G Networks, Inc.
brian@5g.net
(925) 260-2724

-----Original Message-----
From: Nick J. [mailto:nick23423@hotmail.com]
Sent: Thursday, May 24, 2001 8:35 AM
To: cisco-nsp@puck.nether.net
Subject: [nsp] Changing Ctrl-Shift-6 X

Is there a way to change the telnet escape sequence on Cisco routers?

Thanks,

Nick
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:38 EDT