RE: serial channels not available = busy signal after cold boot

From: Dave VanAuken (dave@hawk-systems.com)
Date: Thu May 24 2001 - 17:55:46 EDT


further debug regarding the problem (isdn-status, service, events)

Bell watched the line during several restarts of the T1 controller,
they are not issuing the "out-of-service" tag and cannot find any
peculiarities on the line.

this is a text file zipped to cut down on file size for those who
don't want it :)

in short, the access server is setting the channels to
"out-of-service" and according to bell, this is not a result of thier
signalling... they read everything as fine.

appreciate all the suggestions and help to date

Dave





This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:38 EDT