we've learned a little from our cisco support folk: apparently there is
a "Coil ASIC" on the 10/100 TX blades for 6500s. they've not explained
what it's function is.
however, this blade went comatose about 2 hours after the messages
started; it's being RMA'd.
ken
On Thu, 14 Jun 2001, i <lindahl@ack.berkeley.edu> wrote:
>hi,
>
>does anyone have any pointers on the following error message:
>
>2001 Jun 14 14:50:50 PDT -07:00 %SYS-3-SYS_LCPERR3:Module 4: Coil Pb Tx Underflow Error - Port #13:
>2001 Jun 14 14:50:50 PDT -07:00 %SYS-3-SYS_LCPERR3:Module 4: Coil Pb Tx Underflow Error - Port #14:
>2001 Jun 14 14:50:50 PDT -07:00 %SYS-3-SYS_LCPERR3:Module 4: Coil Pb Tx Underflow Error - Port #15:
>2001 Jun 14 14:50:50 PDT -07:00 %SYS-3-SYS_LCPERR3:Module 4: Coil Pb Tx Underflow Error - Port #23:
>
>
>this is happening on a catalyst 6506 w/sup2, pfc2, msfc2, running ver 6.1(2)
>on the sup2. Module 4 is a 48-port 10/100 TX blade; there are identical
>blades in slots 2, 3, and 5 that are not showing this problem. the error
>appears to be affecting ports 13-23 on the blade, when it happens it happens
>to several ports at the same time, but not always the same set of ports.
>
>i can't find any reference to this error message on cisco's web pages.
>
>thanks,
>ken
>
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:42 EDT