Re: [nsp] Line protocol down!!

From: Brian (bri@sonicboom.org)
Date: Thu Jun 21 2001 - 12:13:51 EDT


Traffic only flowing one way, remember you need 2 way traffic to keep the connection up. I have seen loose/bad cables and telco problems cause this.

    Brian Whalen
  ----- Original Message -----
  From: Konstantinos Bilalis
  To: cisco-nsp@puck.nether.net
  Sent: Thursday, June 21, 2001 1:55 AM
  Subject: [nsp] Line protocol down!!

  Dear all.

   

  I have a problem in a router and everyone that could help I would be greatful.

  Although the router's interface is "Serial1/2 is up, line protocol is down",

  I have "30 second input rate 718000 bits/sec, 154 packets/sec & 30 second output rate 0 bits/sec, 0 packets/sec"!

  Is this possible to happen???

   

  Thanks in advance.

   



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:42 EDT