I need console access to some devices.
Currently I use a 2600 with an Async module, this allows me to telnet, in
effect,
to the console port. But I need to be able to dial into the terminal
server(2600)
without wasting an async port on a modem. I have a DC environment and do
not want to use an external modem as this would be an AC device and thus
subjected to the AC weaknesses in our POP's.
Anyone know of a WIC card that can accept dial-in (POTS or ISDN)?
Thanks in advance.
Jonathan Desmarais
Data Network Engineer
COLT Telecom UK
**********************************************************************
COLT Telecommunications
Registered in England No. 2452736
Registered Office: Bishopsgate Court, 4 Norton Folgate, London E1 6DQ
Tel. 020 7390 3900
This message is subject to and does not create or vary any contractual
relationship between COLT Telecommunications, its subsidiaries or
affiliates ("COLT") and you. Internet communications are not secure
and therefore COLT does not accept legal responsibility for the
contents of this message. Any view or opinions expressed are those of
the author. The message is intended for the addressee only and its
contents and any attached files are strictly confidential. If you have
received it in error, please telephone the number above. Thank you.
**********************************************************************
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:44 EDT