Bridging is either not supported or not functioning in the 12.0S train
last that I noticed. If that's a concern, then I'd suggest looking
at 12.1E and using RBE (Route Bridge Encapsulation) instead, to get
briding you have to use a "kitchen-sink" image that has a lot of
stuff of little or no interest to an ISP.
George
> From cisco-nsp-request@puck.nether.net Fri Jul 27 15:15:46 2001
> Resent-Date: Fri, 27 Jul 2001 15:15:38 -0400
> Received-Date: Fri, 27 Jul 2001 15:13:22 -0400
> Date: Fri, 27 Jul 2001 15:13:16 -0400 (EDT)
> From: Charles Sprickman <spork@inch.com>
> To: Jared Mauch <jared@puck.nether.net>
> cc: Przemyslaw Karwasiecki <karwas@ifxcorp.com>,
> "Eric L. Howard" <elh@outreachnetworks.com>,
> Cisco NSP List <cisco-nsp@puck.nether.net>
> Subject: Re: [nsp] 7206 config/IOS recommendation...
> In-Reply-To: <20010726145505.G17485@puck.nether.net>
> Resent-From: cisco-nsp@puck.nether.net
> X-Mailing-List: <cisco-nsp@puck.nether.net> archive/latest/7358
> X-Loop: cisco-nsp@puck.nether.net
> Precedence: list
> Resent-Sender: cisco-nsp-request@puck.nether.net
>
> Hi,
>
> Will the version Jared suggested below support bridging for BVIs? In the
> past it did not, because the bridging component is part of either IP-plus
> or Enterprise, I believe.
>
> If anyone is running this (or an earlier release) and doing 1483 DSL
> stuff with BVI's, please let me know... I'm also unclear on whether dot1q
> is CEF switched or not in this version.
>
> Thanks,
>
> Charles
>
> On Thu, 26 Jul 2001, Jared Mauch wrote:
>
> > I suggest c7200-k4p-mz.120-18.S.bin
> >
> > Or 12.0(17)S1
> >
> > - jared
> >
> > On Thu, Jul 26, 2001 at 02:41:15PM -0400, Przemyslaw Karwasiecki wrote:
> > > Use feature navigator to verify if 802.1q is available
> > > on train you will select.
> > >
> > > For instance Network Provider train doesn't support 802.1q
> > >
> > > Przemek
> > >
> > > -----Original Message-----
> > > From: Eric L. Howard [mailto:elh@outreachnetworks.com]
> > > Sent: Thursday, July 26, 2001 1:48 PM
> > > To: Cisco NSP List
> > > Subject: [nsp] 7206 config/IOS recommendation...
> > >
> > >
> > > I'm in the process of spec'ing a 7206VXR w/ 2xPA-MC-2T3+ and was wondering
> > > what train has shown good success w/ this config. Nothing to crazy going on
> > > here...a few BGP sessions for upstream and all static (currently) on the
> > > inside. Although 802.1q will be coming up shortly.
> > >
> > > ~ELH~
> > >
> > > --
> > > Eric L. Howard e l h @ o u t r e a c h n e t w o r k s . c o m
> > > ----------------------------------------------------------------------
> > > www.OutreachNetworks.com 313.297.9900
> >
> > --
> > Jared Mauch | pgp key available via finger from jared@puck.nether.net
> > clue++; | http://puck.nether.net/~jared/ My statements are only mine.
> >
>
>
Z
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:47 EDT