Thankyou, but Cat 5000 doesn't support OID 1.3.6.1.4.1.9.9.13.., therefore
I've asked, if someone knows how to get the temp value, not temp alarm.
greetz
Alex
-----Original Message-----
From: Douglas M. Todd, Jr. [mailto:dtodd@partners.org]
Sent: Saturday, August 04, 2001 3:34 AM
To: kf@reign.sk; cisco-nsp@puck.nether.net
Subject: RE: [nsp] cat 5000 temperature
Sure:
You will find this in Cisco envmon mib (ftp.cisco.com)
ie:
"ciscoEnvMonTemperatureStatusEntry" "1.3.6.1.4.1.9.9.13.1.3.1"
"ciscoEnvMonTemperatureStatusIndex" "1.3.6.1.4.1.9.9.13.1.3.1.1"
"ciscoEnvMonTemperatureStatusDescr" "1.3.6.1.4.1.9.9.13.1.3.1.2"
"ciscoEnvMonTemperatureStatusValue" "1.3.6.1.4.1.9.9.13.1.3.1.3"
"ciscoEnvMonTemperatureThreshold" "1.3.6.1.4.1.9.9.13.1.3.1.4"
"ciscoEnvMonTemperatureLastShutdown" "1.3.6.1.4.1.9.9.13.1.3.1.5"
"ciscoEnvMonTemperatureState" "1.3.6.1.4.1.9.9.13.1.3.1.6"
"ciscoEnvMonFanStatusEntry" "1.3.6.1.4.1.9.9.13.1.4.1"
"ciscoEnvMonFanStatusIndex" "1.3.6.1.4.1.9.9.13.1.4.1.1"
"ciscoEnvMonFanStatusDescr" "1.3.6.1.4.1.9.9.13.1.4.1.2"
"ciscoEnvMonFanState" "1.3.6.1.4.1.9.9.13.1.4.1.3"
==DMT>
Douglas M. Todd, Jr.
Network Engineering
Partners Health Care
t: 617-726-1403
c: 617.943.2396
pgp finger:
verisign:
-----Original Message-----
From: KF [mailto:kf@reign.sk]
Sent: Friday, August 03, 2001 10:47 AM
To: cisco-nsp@puck.nether.net
Subject: [nsp] cat 5000 temperature
Hi...
Is possible to get by snmp temperature of the chasiss Cat 5500 ?
Anybody knows the OID for this?
I know the system have the temp sensor... but..?
thnx
Alex
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:48 EDT