[nsp] help with bridging vlans

From: Angel Behar Rodriguez (abehar@mail.pacificnet.com.mx)
Date: Mon Oct 29 2001 - 21:03:25 EST


I have several vlans configured on a catalyst 4006 with RSM

I need to use one VLAN for a server farm and should be seen from any vlan
but the problem is that the network is a Class B network so if I use
transparent bridging all the vlans see each other and I just want that
vlans to see the common vlan. In other words Vlan 3 and Vlan 4 should see
 vlan 2 but Vlan 3 and vlan 4 shold not see each other.

I can't route (?) because the hosts mask is 255.255.0.0.

Thanks for your help.

I'm not in the list (yet) please replay to my account.

This is my configuration :

interface Port-channel1.2
 encapsulation dot1Q 2
 bridge-group 1
!
interface Port-channel1.3
 encapsulation dot1Q 3
 bridge-group 1
!
interface Port-channel1.4
 encapsulation dot1Q 4
 bridge-group 1

---------------------------------------------------------------------------
 Ing. Angel Behar R. | "The box says : Windows 98, Windows NT or BETTER
 Tel : (67) 15-15-15 | That's why I installed FreeBSD"
---------------------------------------------------------------------------



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:52 EDT