RE: [nsp] Which IOS for 7206VXR, NPE-400, C7200-I/O-2FE/E

From: Pegg Damon (Damon.Pegg@carrier1.com)
Date: Thu Nov 15 2001 - 08:07:59 EST


Config-specific of course but as with Mark B I've found 12.1.5(T6 through
T10) solid, although T6 has been withdrawn!

> -----Original Message-----
> From: Elijah Kagan [mailto:elijah@netvision.net.il]
> Sent: 15 November 2001 11:00
> To: cisco-nsp@puck.nether.net
> Subject: [nsp] Which IOS for 7206VXR, NPE-400, C7200-I/O-2FE/E
>
>
> I am starting this thread again because I had a very bad luck with the
> above hardware. As it turns out 12.0(15)S has some buffering
> problems that
> causes severe packet loss. 12.0(19.1)S which fixes the buffer issue
> introduces memory leak issues, and hence is also unusable.
>
> I am desperate. Which IOS version should I run on a
> 7200VXR/NPE-400/C7200-I/O-2FE/E used as a customer
> aggregation router in a
> small ISP environment? Any reasons for not using the latest 12.2?
>
> -- elijah
>
> On Mon, 16 Jul 2001, Elijah Kagan wrote:
>
> > I am currently running 12.0(15)S3 on 7200VxR with NPE-400 and
> > C7200-I/O-2FE/E IO controller.
> >
> > I have a terrible packet loss on both ethernet ports whenever they
> > are participating in some routing protocol and have above
> 2Mbps utilization.
> >
> > Did anyone came across such an oddity?
> > Can anyone recommend an IOS for this kind of hardware?
> >
> > Thanks,
> >
> > Elijah
> >
> >
> >
>



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:54 EDT