Cisco-nsp,
Say there are two serial interfaces, s0/0 and s0/1
and there are ip address 1.1.1.1/32 and 2.1.1.1/32
respectivefully..
then I have route statments saying
ip route 3.0.0.0/24 1.1.1.2
ip route 3.0.0.0/24 2.1.1.2
here is the question of the day, if I use IP addresses of
the next hop, I noticed EVEN if the interface is down.
why? It does not make sence.
I KNOW I can use serial interfaces dest. route.
but it does not make sence to show unreachable interface as option.
Why?? could someone explain to me ..
TIA,
Tatsuya
/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
Tatsuya Kawasaki
Allegiance Telecom
Unlock the Power of the Internet
http://www.kivex.com
Phone 301.215.6777 Fax 301.215.5991
Affiliation given for identification not representation
/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:55 EDT