Re: [nsp] Frame-Relay between Nortel-Cisco

• Next message: David Sinn: "RE: [nsp] recommended IOS GSR12008/12012"
• Previous message: Stephen Sprunk: "Re: [nsp] tx-ring-limit tuning on ATM PVC"
• In reply to: Stephen Sprunk: "Re: [nsp] Frame-Relay between Nortel-Cisco"
• Next in thread: Daniel Cuautle: "Re: [nsp] Frame-Relay between Nortel-Cisco"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

Do you know on Nortel router?

mtu 1600 or 1506?

management ? annex-a, annex-d, lmi

I have annex-d and intrerface is up but don't response the ping of remote
point.

Regards
dc

Stephen Sprunk wrote:

> Thus spake "Daniel Cuautle" <dcuautle@adetel.net>
> > Somebody know how I can configure routers (nortel-cisco) to have
> > conection point to point with FR?
> > Do you have any tips
>
> Configure the Cisco with "ietf" encapsulation on the PVC, and they should
> talk just fine.
>
> S

• text/x-vcard attachment: Card for Daniel Cuautle

• Next message: David Sinn: "RE: [nsp] recommended IOS GSR12008/12012"
• Previous message: Stephen Sprunk: "Re: [nsp] tx-ring-limit tuning on ATM PVC"
• In reply to: Stephen Sprunk: "Re: [nsp] Frame-Relay between Nortel-Cisco"
• Next in thread: Daniel Cuautle: "Re: [nsp] Frame-Relay between Nortel-Cisco"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:55 EDT