> How to annouce over E-BGP local loopback address (network), that it will
> stay within the remote AS.
>
> WITHOUT using COMMUNITIES
> WITHOUT using incoming or any other filtering at the remote AS.. better
> say without any touch at the remote AS site..
>
> who knows this trick?
If you happen to know *every* other peer that the remote-AS is speaking
with, you could use prepending to insert those ASN's into the as-path. BGP
loop detection should then prevent those prefixes from being propagated...
-mct
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:59 EDT