Has any one had any issues getting Nortel AN router to talk to Cisco 7206
VXR over frame relay.Its not picking up the dlci.
Below is the Serial interface config. on Cisco.
interface Serial1/0/2:2
no ip address
no ip redirects
no ip directed-broadcast
no ip proxy-arp
encapsulation frame-relay IETF
no fair-queue
frame-relay traffic-shaping
frame-relay lmi-type ansi
frame-relay intf-type dce
interface Serial1/0/2:2.1 point-to-point
bandwidth 1984
ip address 10.10.1.0 255.255.255.252
no ip redirects
no ip directed-broadcast
no ip proxy-arp
ip mroute-cache
no cdp enable
frame-relay class 1984kgold
frame-relay interface-dlci 16
***********************************************************************
COLT Telecommunications
Registered in England No. 2452736
Registered Office: Bishopsgate Court, 4 Norton Folgate, London E1 6DQ
Tel. 020 7390 3900
This message is subject to and does not create or vary any contractual
relationship between COLT Telecommunications, its subsidiaries or
affiliates ("COLT") and you. Internet communications are not secure
and therefore COLT does not accept legal responsibility for the
contents of this message. Any view or opinions expressed are those of
the author. The message is intended for the addressee only and its
contents and any attached files are strictly confidential. If you have
received it in error, please telephone the number above. Thank you.
***********************************************************************
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:59 EDT