Re: [nsp] Why the 7206 cannot load my bgp as routing table ? Please Advice !!!

From: Josh Duffek (jduffek@cisco.com)
Date: Thu Jan 24 2002 - 19:29:08 EST


not that im a bgp guru or anything but i think this is why:
> Origin IGP, localpref 100, valid, internal, not synchronized

so if you did:

config t
router bgp X
no sync
end

It might go. That or fix the sync problem.

Josh

----- Original Message -----
From: "Raymond Leung" <rlcw@zonasa.com>
To: <cisco-nsp@puck.nether.net>
Sent: Thursday, January 24, 2002 6:02 PM
Subject: [nsp] Why the 7206 cannot load my bgp as routing table ? Please
Advice !!!

> tip>sh ip bgp 198.133.219.25
> BGP routing table entry for 198.133.219.0/24, version 0
> Paths: (1 available, no best path)
> Not advertised to any peer
> 10032 3549 7018 109, (received & used)
> 10.10.24.1 from 203.129.80.36 (203.129.80.36)
> Origin IGP, localpref 100, valid, internal, not synchronized
> tip>sh ip route 198.133.219.25
> % Network not in table
> tip>
>
> how can i make this into routing table ???
>
> With Regards,
>
>
> Raymond Leung
> Network Analyst
> Zonasa Network Limited
>
>
> Suite 903,Technology Plaza
> 651 King's Road
> Quarry Bay
> Hong Kong
>
> AS4841 Object Maintainer
>



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:01 EDT