Re: [nsp] Filtering OSPF

From: Mark Pace Balzan (mpb@melitacable.com)
Date: Tue Mar 19 2002 - 15:05:36 EST


most likely you should be looking at 'default-originate' in you 'router ospf
<area>' config

----- Original Message -----
From: "Gyorfy, Shawn" <sgyorfy@elinkny.com>
To: <cisco-nsp@puck.nether.net>
Sent: Tuesday, March 19, 2002 8:57 PM
Subject: [nsp] Filtering OSPF

> Question:
> Using Cisco equipment:
>
>
> I have 4 OSPF Areas with X number of routers per area. As of right now
the
> access routers are getting a full routing table from the border router as
> per their appropriate area. I would like to limit their routing table so
> they only get the default route. I am looking at distribution list, am I
> hot on this one or still cold?
>
>
> shawn
>
>
>



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:08 EDT