Hello all,
We activated a few hours ago an HSSI on a VIP2-40 (on CS7507) and we
noticed that we have a lot of input errors:
5 minute input rate 5235000 bits/sec, 1062 packets/sec
5 minute output rate 1158000 bits/sec, 970 packets/sec
36489550 packets input, 4189804262 bytes, 1 no buffer
Received 0 broadcasts, 0 runts, 4 giants
0 parity
281859 input errors, 135002 CRC, 0 frame, 5870 overrun, 0 ignored, 140987 abort
40253137 packets output, 4158990959 bytes, 0 underruns
The router is running 11.1.18.CC software (after your suggestions ;-) and the
configuration is the following:
interface Hssi4/0/0
description ...
ip address ...
ip access-group 120 out
ip access-group 130 in
ip accounting output-packets
ip accounting access-violations
no ip route-cache distributed
bandwidth 8192
Is there anything that you think we can do in order to eliminate the
input errors?
Thanks in advance,
Vicky
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:14 EDT