Hi,
i tried a really simple dial on demand config,
but there is one thing I don't understand.
her the Config:
set systemname cisco760
cd lan
set brid off
set ip routing on
set ip add 195.90.7.1
set subnet 255.255.255.0
set user livingston2
set brid off
set ip route destination 0.0.0.0/0 gateway 195.90.0.3
set ip propagate off
set ip 0.0.0.0
set ip netmask 0.0.0.0
set ip routing on
set ip framing none
set timeout 20
set 1 number 0201190
set 2 number 0201190
set ppp secret host ...
set ppp authentication outgoing chap
The result is:
cisco760> ping 195.90.0.3
Start sending: 01/01/1995 00:00:06 L05 0 0201190 Outgoing Call Initiated
cisco760> 01/01/1995 00:00:07 L08 1 0201190 Call Connected
cisco760> ProcessPkg(HOST_FACILITY)
01/01/1995 00:00:08 L60 1 Password Not Found
cisco760>
Ups no password?
The she's right :-)
The livingston says:
Received PAP_AUTH_REQ on port S4 of 14 bytes containing:
01 01 00 0E 08 63 69 73 63 6F 37 36 30 00
Packet Info: Code: 01, ID: 01, 14 bytes.
Login ID: cisco760 (8 bytes), [0x636973636F373630]
Password: (0 bytes), [0x]
What can I do? Any hints are welcome.
Greetings Thomas
--
-----DPN--Deutsches-Provider-Network----Bremen--------
ISB GmbH Internet-Service, Beratung
http://www.produkt.de/ vertrieb@is-bremen.de
http://www.bremen-ports.de/
------------------------------------------------------
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:14 EDT